Chapter 6 Tutorials
ES-2024 Series User’s Guide
65
6 Click the Save link in the upper right corner of the web configurator to save your
configuration permanently.
7 The DHCP server can then assign a specific IP address based on the DHCP request.
6.1.4 Troubleshooting
Check the client A’s IP address. If it did not receive the IP address 172.16.1.18, make sure:
1 Client A is connected to the Switch’s port 2 in VLAN 102.
2 You configured the correct VLAN ID, port number and system name for DHCP relay on
both the DHCP server and the Switch.
3 You clicked the Save link on the Switch to have your settings take effect.
To Next Page
Loading...
