Chapter 27 DHCP
ES-2024 Series User’s Guide
219
Configure the DHCP Relay screen as shown. Make sure you select the Option 82
check box to set the Switch to send additional information (such as the VLAN ID)
together with the DHCP requests to the DHCP server. This allows the DHCP server
to assign the appropriate IP address according to the VLAN ID.
Figure 116 DHCP Relay Configuration Example
27.4 Configuring DHCP VLAN Settings
Use this screen to configure your DHCP settings based on the VLAN domain of the
DHCP clients. Click IP Application > DHCP in the navigation panel, then click the
VLAN link In the DHCP Status screen that displays.
Note: You must set up a management IP address for each VLAN that you want to
configure DHCP settings for on the Switch. See Section 8.6 on page 78 for
information on how to do this.
Figure 117 IP Application > DHCP > VLAN
To Next Page
Loading...
