Chapter 28 Maintenance
ES-2024 Series User’s Guide
228
Type the path and file name of the firmware file you wish to upload to the Switch
in the File Path text box or click Browse to locate it. Select the Rebooting check
box if you want to reboot the Switch and apply the new firmware immediately.
(Firmware upgrades are only applied after a reboot). Click Upgrade to load the
new firmware.
After the firmware upgrade process is complete, see the System Info screen to
verify your current firmware version number.
28.6 Restore a Configuration File
Restore a previously saved configuration from your computer to the Switch using
the Restore Configuration screen.
Figure 124 Management > Maintenance > Restore Configuration
Type the path and file name of the configuration file you wish to restore in the File
Path text box or click Browse to display the Choose File screen (below) from
which you can locate it. After you have specified the file, click Restore. "config" is
the name of the configuration file on the Switch, so your backup configuration file
is automatically renamed when you restore using this screen.
28.7 Backup a Configuration File
Backing up your Switch configurations allows you to create various “snap shots” of
your device from which you may restore at a later date.
To Next Page
Loading...
