Chapter 29 Access Control
ES-2024 Series User’s Guide
248
2 HTTP connection requests from a web browser go to port 80 (by default) on the
Switch’s WS (web server).
Figure 133 HTTPS Implementation
Note: If you disable HTTP in the Service Access Control screen, then the Switch
blocks all HTTP connection attempts.
29.8 HTTPS Example
If you haven’t changed the default HTTPS port on the Switch, then in your browser
enter “https://Switch IP Address/” as the web site address where “Switch IP
Address” is the IP address or domain name of the Switch you wish to access.
29.8.1 Internet Explorer Warning Messages
When you attempt to access the Switch HTTPS server, a Windows dialog box pops
up asking if you trust the server certificate. Click View Certificate if you want to
verify that the certificate is from the Switch.
To Next Page
Loading...
