Chapter 33 MAC Table
ES-2024 Series User’s Guide
271
The following table describes the labels in this screen.
Table 97 Management > MAC Table
LABEL DESCRIPTION
Condition Select one of the buttons and click Search to only display the data which
matches the criteria you specified.
Select All to display any entry in the MAC table of the Switch.
Select Static to display the MAC entries manually configured on the
Switch.
Select MAC and enter a MAC address in the field provided to display a
specified MAC entry.
Select VID and enter a VLAN ID in the field provided to display the MAC
entries belonging to the specified VLAN.
Select Port and enter a port number in the field provided to display the
MAC addresses which are forwarded on the specified port.
Sort by Click one of the following buttons to display and arrange the data
according to that button type. The information is then displayed in the
summary table below.
MAC Click this button to display and arrange the data according to MAC
address.
VID Click this button to display and arrange the data according to VLAN group.
Port Click this button to display and arrange the data according to port number.
Index This is the incoming frame index number.
MAC Address This is the MAC address of the device from which this incoming frame
came.
VID This is the VLAN group to which this frame belongs.
Port This is the port from which the above MAC address was learned.
Type This shows whether the MAC address is dynamic (learned by the Switch)
or static (manually entered in the Static MAC Forwarding screen).
To Next Page
Loading...
