ZyXEL Communications ES3500-24 - Page 168

Chapter 20 Classifier
ES3500 Series User’s Guide
168
Click Advanced Application > Classifier in the navigation panel to display the configuration
screen as shown.
Figure 87 Advanced Application > Classifier
The following table describes the labels in this screen.
Table 53 Advanced Application > Classifier
LABEL DESCRIPTION
Active Select this option to enable this rule.
Name Enter a descriptive name for this rule for identifying purposes.
Layer 2
Specify the fields below to configure a layer-2 classifier.
VLAN Select Any to classify traffic from any VLAN or select the second option and specify the source
VLAN ID in the field provided.
Priority Select Any to classify traffic from any priority level or select the second option and specify a
priority level in the field provided.
Ethernet
Type
Select an Ethernet type or select Other and enter the Ethernet type number in hexadecimal
value. Refer to Table 55 on page 170 for information.
Source
MAC
Address
Select Any to apply the rule to all MAC addresses.
To specify a source, select the second choice and type a MAC address in valid MAC address format
(six hexadecimal character pairs).