Chapter 24 Multicast
ES3500 Series User’s Guide
196
port in the same subscriber VLAN, the receiving port will still be on the list of forwarding destination
for the multicast traffic. Otherwise, the Switch removes the receiver port from the forwarding table.
Figure 103 MVR Multicast Television Example
24.7 General MVR Configuration
Use the MVR screen to create multicast VLANs and select the receiver port(s) and a source port for
each multicast VLAN. Click Advanced Applications > Multicast > Multicast Setting > MVR link
to display the screen as shown next.
Note: You can create up to five multicast VLANs and up to 256 multicast rules on the
Switch.
To Next Page
Loading...
