Chapter 34 Green Ethernet
ES3500 Series User’s Guide
266
34.2 Configuring Green Ethernet
Click Advanced Application > Green Ethernet in the navigation panel to display the screen as
shown.
Figure 154 Advanced Application > Green Ethernet
The following table describes the labels in this screen.
Table 112 Advanced Application > Green Ethernet
LABEL DESCRIPTION
EEE Select this to activate Energy Efficient Ethernet globally.
Auto Power Down Select this to activate Auto Power Down globally.
Short Reach Select this to activate Short Reach globally.
Port This shows the port on the device.
EEE Select this to activate Energy Efficient Ethernet on this port.
Auto Power Down Select this to activate Auto Power Down on this port.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch
loses these changes if it is turned off or loses power, so use the Save link on the
top navigation panel to save your changes to the non-volatile memory when you
are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
To Next Page
Loading...
