Chapter 42 Cluster Management
ES3500 Series User’s Guide
324
The following table explains some of the FTP parameters.
Table 144 FTP Upload to Cluster Member Example
FTP PARAMETER DESCRIPTION
User
Enter “admin”.
Password
The web configurator password default is 1234.
ls
Enter this command to list the name of cluster member switch’s firmware
and configuration file.
400AABR0B2.bin
This is the name of the firmware file you want to upload to the cluster
member switch.
fw-00-a0-c5-01-23-46
This is the cluster member switch’s firmware name as seen in the cluster
manager switch.
config-00-a0-c5-01-23-46
This is the cluster member switch’s configuration file name as seen in the
cluster manager switch.
To Next Page
Loading...
