Chapter 16 Auto VoIP
GS-1524/GS-1548 User’s Guide
94
16.2 Auto VoIP Settings
Use the Auto VoIP Settings to enable automatic assignment of high priority to
VoIP packets passing through the Switch. Click Auto VoIP in the navigation panel
to view the following screen.
Figure 53 Auto VoIP Settings
The following table describes the labels in this screen.
Table 32 Auto VoIP Settings
LABEL DESCRIPTION
Profiles Select Disable if you don’t want to give higher priority to VoIP traffic or
select IP Phone to give the highest priority to SIP, MGCP and SCCP
packets passing through the Switch.
Apply Click Apply to save your changes.
To Next Page
Loading...
