ZyXEL Communications GS-3012F/3012 - Page 236

Chapter 29 Access Control
GS-3012/GS-3012F User’s Guide
236
temperature TemperatureEventOn GS-3012F:
1.3.6.1.4.1.890.1.5.8.11.25.2.1
GS-3012:
1.3.6.1.4.1.890.1.5.8.10.25.2.1
This trap is sent when the
temperature goes above or below the
normal operating range.
TemperatureEventClear GS-3012F:
1.3.6.1.4.1.890.1.5.8.11.25.2.2
GS-3012:
1.3.6.1.4.1.890.1.5.8.10.25.2.2
This trap is sent when the
temperature returns to the normal
operating range.
voltage VoltageEventOn GS-3012F:
1.3.6.1.4.1.890.1.5.8.11.25.2.1
GS-3012:
1.3.6.1.4.1.890.1.5.8.10.25.2.1
This trap is sent when the voltage
goes above or below the normal
operating range.
VoltageEventClear GS-3012F:
1.3.6.1.4.1.890.1.5.8.11.25.2.2
GS-3012:
1.3.6.1.4.1.890.1.5.8.10.25.2.2
This trap is sent when the voltage
returns to the normal operating
range.
reset UncontrolledResetEventOn GS-3012F:
1.3.6.1.4.1.890.1.5.8.11.25.2.1
GS-3012:
1.3.6.1.4.1.890.1.5.8.10.25.2.1
This trap is sent when the Switch
automatically resets.
ControlledResetEventOn GS-3012F:
1.3.6.1.4.1.890.1.5.8.11.25.2.1
GS-3012:
1.3.6.1.4.1.890.1.5.8.10.25.2.1
This trap is sent when the Switch
resets by an administrator through a
management interface.
RebootEvent GS-3012F:
1.3.6.1.4.1.890.1.5.0.1
GS-3012:
1.3.6.1.4.1.890.1.5.0.1
This trap is sent when the Switch
reboots by an administrator through
a management interface.
timesync RTCNotUpdatedEventOn GS-3012F:
1.3.6.1.4.1.890.1.5.8.11.25.2.1
GS-3012:
1.3.6.1.4.1.890.1.5.8.10.25.2.1
This trap is sent when the Switch
fails to get the time and date from a
time server.
RTCNotUpdatedEventClear GS-3012F:
1.3.6.1.4.1.890.1.5.8.11.25.2.2
GS-3012:
1.3.6.1.4.1.890.1.5.8.10.25.2.2
This trap is sent when the Switch
gets the time and date from a time
server.
intrusionlock IntrusionLockEventOn GS-3012F:
1.3.6.1.4.1.890.1.5.8.11.25.2.1
GS-3012:
1.3.6.1.4.1.890.1.5.8.10.25.2.1
This trap is sent when intrusion lock
occurs on a port.
loopguard LoopguardEventOn GS-3012F:
1.3.6.1.4.1.890.1.5.8.11.25.2.1
GS-3012:
1.3.6.1.4.1.890.1.5.8.10.25.2.1
This trap is sent when loopguard
shuts down a port.
Table 88 SNMP System Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION