ZyXEL Communications GS-4012F - Page 234

GS-4012F User’s Guide
Chapter 39 Introducing the Commands 233
cluster
Disables cluster management
on the switch.
cluster member <mac-address>
Removes the cluster member.
dhcp relay
Disables DHCP relay.
information
Disables the relay agent
information option 82.
option
System name is not appended
to option 82 information field.
dhcp server <vlan-
id>
Disables DHCP server settings.
default-gateway
Disables DHCP server default
gateway settings.
primary-dns
Disables DHCP primary DNS
server settings.
secondary-gateway
Disables DHCP server
secondary gateway settings.
diffserv
Disables the DiffServ settings.
https timeout
Resets the session timeout to
the default of 300 seconds.
igmp-snooping
Disables IGMP snooping.
ip
Sets the management IP
address to the default value.
route <ip> <mask>
Removes a specified IP static
route.
route <ip> <mask>
inactive
Enables a specified IP static
route.
lacp
Disables the link aggregation
control protocol (dynamic
trunking) on the switch.
logins
Disables login access to the
specified name.
mac-filter name <name> mac
<mac-addr> vlan
<vlan-id> drop
<src/dst/both>
inactive
Enables the specified MAC-filter
rule.
name <name> mac
<mac-addr> vlan
<vlan-id> drop
<src/dst/both>
Disables the specified MAC
filter rule.
mac-forward name <name> mac
<mac-addr> vlan
<vlan-id>
interface
<interface-id>
Removes the specified MAC
forwarding entry, belonging to a
VLAN group (if any) forwarded
through an interface(s).
Table 90 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION