Chapter 12 SNMP
GS1500-24P User’s Guide
103
12.6 Technical Reference
This section provides technical background information on the topics discussed in
this chapter.
Notify View
Name
Type the name of the notify view that you configured for this group.
Apply Click Apply to save your changes to the Switch.
Group Name This field displays the name of the group.
Security Level This field displays the level of security for this group.
Read View
Name
This field displays the name of the read view configured for this group.
Write View
Name
This field displays the name of the write view configured for this group.
Notify View
Name
This field displays the name of the notify view configured for this group.
Select Select the access settings you want to delete.
Delete Click Delete to remove any selected access settings.
USM (
User-based Security Model) Users
User Name Specify the name for this SNMP user. You can use up to 33 printable
characters. Spaces are allowed.
Authentication Select to use an authentication algorithm or not. MD5 (Message Digest
5) is a hash algorithm used to authenticate SNMP data. If MD5 is
selected you will need to fill in the next two fields.
Password Type the authentication password for this user.
Retype Retype the authentication password to ensure it is correct.
Privacy Specify if this user will use the DES encryption method for SNMP
communication. If DES is selected you will need to fill in the next two
fields.
DES - Data Encryption Standard is a widely used (but breakable)
method of data encryption. It applies a 56-bit key to each 64-bit block
of data.
Password Type the encryption password for this user.
Retype Retype the encryption password to ensure it is correct.
Apply Click Apply to save your changes to the Switch.
User Name This field displays the username of the SNMP user.
Authentication This field displays the authentication algorithm used, if any.
Privacy This field displays the encryption method used, if any.
Select Select the checkbox for the user you want to delete.
Delete Click Delete to remove any selected users.
Table 31 Configuration > SNMP > SNMPv3 Setting (continued)
LABEL DESCRIPTION
To Next Page
Loading...
