ZyXEL Communications GS1500-24P - Adding and Modifying Rate Limit Policies

Chapter 13 Rate Limit
GS1500-24P User’s Guide
108
The following table describes the labels in this screen.
13.3.1 Rate Limit Add/Modify
Click Configuration > Rate Limit Add/Modify in the navigation panel to display
the screen as shown.
Figure 50 Configuration > Rate Limit Add/Modify
The following table describes the labels in this screen.
Table 34 Configuration > Rate Limit
LABEL DESCRIPTION
No. This field displays the index number of the rate limit policy.
Name This field displays the descriptive name for the policy. This is for
identification purpose only.
Modify Click the Modify button to edit the rate limit policy.
Delete Select the checkbox for the rate limit policy you want to delete.
Add Click Add to configure a new rate limit policy.
Select All Click Select All to select all the entries in the table.
Delete Click Delete to remove any selected entries from the table.
Table 35 Configuration > Rate Limit Add/Modify
LABEL DESCRIPTION
Name Type a descriptive name for the rate limit policy. This is for identification
purposes only.
Destination
MAC
Address
To specify a destination, type a MAC address in valid MAC address format
(six hexadecimal character pairs).
Mask Enter the mask of the Destination MAC Address.
Source MAC
Address
To specify a source, type a MAC address in valid MAC address format (six
hexadecimal character pairs).