Chapter 4 The Web Configurator
GS1500-24P User’s Guide
42
CONFIGURATION
Link
Aggregation
This sub-menu takes you to screens where you can logically aggregate
physical links to form one logical, higher-bandwidth link.
Trunk
Group
Setting
This link takes you to a screen where you can assign ports to be part of
a trunk group.
Trunk
Distribution
Algorithim
This link takes you to a screen where you can configure the trunk
distribution algorithm for the trunk groups.
LACP
Setting
This link takes you to a screen where you can enable Link Aggregation
Control Protocol (LACP)
VLAN This sub-menu takes you to screens where you can configure a port-
based VLAN.
Static VLAN This link takes you to a screen where you can configure the static VLAN
(IEEE 802.1Q) settings on a port.
Port-based
VLAN
This link takes you to a screen where you can configure the port VLAN ID
(PVID) for a port.
Spanning Tree This sub-menu takes you to screens where you can configure the RSTP
to prevent network loops.
STP Global
Setting
This link takes you to a screen where you can configure the global
spanning tree settings for the Switch.
STP Port
Setting
This link takes you to a screen where you can configure individual port
spanning tree settings.
QoS This sub-menu takes you to screens where you can configure the
Switch’s quality of service (QoS) parameters.
Port-based
priority
This link takes you to a screen where you can assign a IEEE
802.1p priority to packets based on the ingress (incoming) port
of the packet.
DSCP-
based
priority
This link takes you to a screen where you can assign priority to
packets based on their Differentiated Services Code Points
(DSCPs).
Policy-
based
priority
This link takes you to a screen where you can classify and prioritize
certain traffic flows.
Priority to
Queue
Mapping
Setting
This link takes you to a screen where you can configure the priority
level-to-physical queue mapping.
Packet
Scheduling
This link takes you to a screen where you can set priorities for the
Switch queues.
Mirroring This sub-menu takes you to screens where you can copy traffic from one
port or ports to another port in order that you can examine the traffic
from the first port without interference.
Port-based
Mirroring
This link takes you to a screen where you can configure port-based
mirroring.
Policy-
based
Mirroring
This link takes you to a screen where you can classify an ingress
traffic flow for mirroring.
Table 4 Navigation Panel Links (continued)
LINK DESCRIPTION
To Next Page
Loading...
