ZyXEL Communications GS1500-24P - Password Change and Lockout Procedures

Chapter 4 The Web Configurator
GS1500-24P User’s Guide
44
4.3.1 Change Your Password
After you log in for the first time, it is recommended you change the default
administrator password. Click System > User Account to display the next
screen.
Figure 16 Change Administrator Login Password
4.4 Saving Your Configuration
When you are done modifying the settings in a screen, click the Apply button to
save your changes to the Switch.
4.5 Switch Lockout
You could block yourself (and all others) from managing the Switch if you do one
of the following:
MONITORING
Logging This sub-menu takes you to screens where you can view and setup
system logs.
Logging
Setting
This link takes you to a screen where you can configure log settings.
Logging
Viewing
This link takes you to a screen where you can view system logs.
Port Statistics This link takes you to a screen where you can view port statistics.
TOOLS
TFTP This link takes you to a screen where you can perform firmware and
configuration file maintenance.
Reset This link takes you to a screen where you can reset the switch to factory
default settings.
Reboot This link takes you to a screen where you can reboot the switch.
Table 4 Navigation Panel Links (continued)
LINK DESCRIPTION