Chapter 4 The Web Configurator
GS1500-24P User’s Guide
45
1 Disable all ports.
2 Forget the password and/or IP address.
3 Prevent all services from accessing the Switch.
Note: Be careful not to lock yourself and others out of the Switch.
4.6 Resetting the Switch
If you lock yourself (and others) from the Switch or forget the administrator
password, you will need to reload the factory-default configuration file or reset the
Switch back to the factory defaults.
4.7 Logging Out of the Web Configurator
Click Logout in the navigation panel to exit the web configurator. You have to log
in with your password again after you log out. This is recommended after you
finish a management session for security reasons.
Figure 17 Web Configurator: Logout
To Next Page
Loading...
