Chapter 6 System
GS1500-24P User’s Guide
54
Click System > IP Setting in the navigation panel to display the screen as
shown.
Figure 22 System > IP Setting
The following table describes the labels in this screen.
6.6 User Account
Use the User Account screen to configure the web configurator login details.
Click System > User Account in the navigation panel to display the screen as
shown.
Note: It is highly recommended that you change the default password (1234).
Figure 23 System > User Account
Table 7 System > IP Setting
LABEL DESCRIPTION
Mode Select Static IP from the drop-down box if you don’t have a DHCP server
or if you wish to assign static IP address information to the Switch. You
need to fill in the following fields when you select this option.
Select DHCP option if you have a DHCP server that can assign the Switch
an IP address, subnet mask and a gateway IP address automatically.
IP Address Enter the IP address of your Switch in dotted decimal notation for
example 192.168.1.1.
Subnet Mask Enter the IP subnet mask of your Switch in dotted decimal notation for
example 255.255.255.0.
Gateway Enter the IP address of the gateway in dotted decimal notation.
Apply Click Apply to save your changes to the Switch.
To Next Page
Loading...
