ZyXEL Communications GS1500-24P - Port-Based VLAN

Chapter 8 VLAN
GS1500-24P User’s Guide
71
8.5 Port-based VLAN
Use the Port-based VLAN screen to configure the port VLAN ID (PVID). To access
this screen click Configuration > VLAN > Port-based VLAN.
A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on
a port so that the frames are forwarded to the VLAN group that the tag defines.
The Management port must be in VLAN 1. If the Management port is removed
from VLAN 1, then you will not be able to access the Switch via the Management
port unless you reset the Switch.
Figure 32 Configuration > VLAN > Port-based VLAN
The following table describes the labels in this screen.
Untagged
Ports
This field displays all the ports that will transmit outgoing frames without
a VLAN group ID tag.
Delete Select the check box and click Delete to remove the VLAN group.
Delete Click Delete to remove the selected entry from the summary table.
Table 14 Configuration > VLAN > Static VLAN (continued)
LABEL DESCRIPTION
Table 15 Configuration > VLAN > Port-based VLAN
LABEL DESCRIPTION
Port Select the ports to change the PVID for.
PVID Enter a number between 1 and 4094 as the port VLAN ID (PVID).
Port This field displays the port number.