ZyXEL Communications GS1900-8 - The Port Edit Screen

Chapter 19 Configuration: Port
GS1900 Series User’s Guide
112
19.6.2 The Port Edit Screen
Use this screen to configure Storm Control settings for individual ports. Click Configuration >
Port > Storm Control > Port > Edit to open this screen.
Figure 103 Configuration > Port > Storm Control > Port > Edit
The following table describes the labels in this screen.
Table 70 Configuration > Port > Storm Control > Port > Edit
LABEL DESCRIPTION
Port
Port List Displays the port list index number(s).
State Select Enable to activate traffic storm control on the port(s).
Action Determines the action the device takes when a limit is reached. The following options are
available:
• Drop - drop the packet when limit is reached.
• Shutdown - shutdown the connection when a limit is reached.
Broadcast (pps) Click the Enable checkbox to active the feature.
Enter the maximum number of broadcast packets the port can receive per second.
Unknown
Multicast (pps)
Click the Enable checkbox to active the feature.
Enter the maximum number of multicast packets the port can receive per second.
Unknown
Unicast (pps)
Click the Enable checkbox to active the feature.
Enter the maximum number of unicast packets the port can receive per second.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.