Chapter 22 Configuration: Link Aggregation
GS1900 Series User’s Guide
132
The following table describes the labels in this screen.
22.2.3 The LAG Add Screen
Use this screen to add a LAG. Click Configuration > Link Aggregation > LAG Management >
Add to open this screen.
Figure 125 Configuration > Link Aggregation > LAG Management > Add
Table 90 Configuration > Link Aggregation > LAG Management
LABEL DESCRIPTION
LAG Management
Add Click Add to create a new LAG Management entry.
LAG Displays the link aggregation group (LAG), that is, one logical link containing multiple ports.
Name Displays the name of the link aggregation group.
Type This field displays how these ports were added to the trunk group. It displays:
Static - if the ports are configured as static members of a trunk group.
LACP - if the ports are configured to join a trunk group via LACP.
Link Status Displays link status as either Link up or Link down.
Active Member Displays if this member is an active member of a trunk.
Standby
Member
Displays if this member is an standby member of a trunk.
Modify
Edit Click Edit to make changes to the entry.
Delete Click Delete to remove the entry.
To Next Page
Loading...
