ZyXEL Communications GS1900-8 - The LAG Port Edit Screen; The LACP Port Screen

Chapter 22 Configuration: Link Aggregation
GS1900 Series User’s Guide
134
22.2.5 The LAG Port Edit Screen
Use this screen to edit a LAG port. Click Configuration > Link Aggregation > LAG Port > Edit
to open this screen.
Figure 127 Configuration > Link Aggregation > LAG Port > Edit
The following table describes the labels in this screen.
22.2.6 The LACP Port Screen
Use this screen to view LACP Port settings. Click Configuration > Link Aggregation > LACP Port
to open this screen.
Table 93 Configuration > Link Aggregation > LAG Port > Edit
LABEL DESCRIPTION
LAG Port Edit
LAG Displays the LAG index values.
State Select the state to be Enable or Disable.
Speed Displays the speed value as Auto, 10M, 100M, or 1000M.
Flow Control Select Enable to use the flow control feature.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.