ZyXEL Communications GS1900-8 - The Throttling Screen; The Add;Edit Throttling Screen

Chapter 25 Configuration: Multicast
GS1900 Series User’s Guide
148
25.2.8 The Throttling Screen
Use this screen to view the Throttling settings. Click Configuration > Multicast > IGMP >
Throttling to open this screen.
Figure 141 Configuration > Multicast > IGMP > Throttling
The following table describes the labels in this screen.
25.2.9 The Add/Edit Throttling Screen
Use this screen to configure the Throttling settings. Click Configuration > Multicast > IGMP >
Throttling > Add/Edit to open this screen.
Group To Enter the profile end group IP address.
Match Action Select the action of the profile as to be Permit or Deny.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
Table 106 Configuration > Multicast > IGMP > Profile > Add/Edit (continued)
LABEL DESCRIPTION
Table 107 Configuration > Multicast > IGMP > Throttling
LABEL DESCRIPTION
IGMP Port Throttling
Edit Select this check box to configure the properties of a port. Click the Edit button change the
properties of the port.
Port Displays the port index value.
Max. Groups Displays the maximum number of groups.
Exceed Group
Number Action
Displays the action taken by the groups as Permit or Deny.
Filter Profile ID Displays the throttling filter profile ID.