ZyXEL Communications GS1900-8 - The MST Port Edit Screen

Chapter 26 Configuration: Spanning Tree
GS1900 Series User’s Guide
158
Figure 151 Configuration > Spanning Tree > MST Port
The following table describes the labels in this screen.
26.2.10 The MST Port Edit Screen
Use this screen to configure the MST Port Edit settings. Click Configuration > Spanning Tree >
MST Port > Edit to open this screen.
Table 117 Configuration > Spanning Tree > MST Port
LABEL DESCRIPTION
MST Port
MST ID Select the MST port ID number from the dropdown list.
Edit Select this check box to configure the properties of MST ID. Click the Edit button change
the properties of the MST ID.
Port Displays the index number of the MST port.
MSTI ID Displays the index value of the MSTI.
Priority Displays the priority for each port.
Internal Path
Cost
Displays the internal path cost.