GS1900 Series User’s Guide
160
CHAPTER 27
Configuration: LLDP
27.1 Overview
This section provides information for LLDP in Configuration.
Use the Link Layer Discovery Protocol (LLDP) screens to configure LLDP Switch settings.
27.2 LLDP
This page allows the user to inspect and configure the current LLDP port settings.
27.2.1 The Global Screen
Use this screen to configure the Global settings. Click Configuration > LLDP > Global to open
this screen.
Figure 153 Configuration > LLDP > Global
The following table describes the labels in this screen.
Table 119 Configuration > LLDP > Global
LABEL DESCRIPTION
Global
State Select Enable to activate the global LLDP.
To Next Page
Loading...
