ZyXEL Communications GS1900-8 - The DSCP Mapping Screen

Chapter 28 Configuration: QoS
GS1900 Series User’s Guide
177
28.2.5 The DSCP Mapping Screen
Use this screen to configure the DSCP Mapping settings. Click Configuration > QoS > General
> DSCP Mapping to open this screen.
Figure 166 Configuration > QoS > General > DSCP Mapping
The following table describes the labels in this screen.
Table 132 Configuration > QoS > General > DSCP Mapping
LABEL DESCRIPTION
DSCP to Queue Mapping
Queue ID Displays the DSCP Queue ID value.
Queue to DSCP Mapping
DSCP (0-63) Select the DSCP mapping value from the dropdown list.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.