ZyXEL Communications GS1900-8 - The Port Edit Screen

Chapter 29 Configuration: Security
GS1900 Series User’s Guide
183
Figure 172 Configuration > Security > Port Security > Port
The following table describes the labels in this screen.
29.2.3 The Port Edit Screen
Use this screen to configure the Port settings. Click Configuration > Security > Port Security >
Port > Edit to open this screen.
Table 138 Configuration > Security > Port Security > Port
LABEL DESCRIPTION
Port
Edit Click Edit change the properties of the port.
Port Displays the port index value.
State Displays the Trust status as Enable/Disable.
Max. MAC Entry
Number
Displays the designated maximum number of allowed MAC entries. The maximum MAC
entry number can be learned for individual ports.
Action Displays the Action as Discard or Shutdown.