Chapter 30 Configuration: AAA
GS1900 Series User’s Guide
194
30.4 TACACS+
30.4.1 The TACACS+ Screen
Use this screen to configure the TACACS+ settings. Click Configuration > AAA > TACACS+ to
open this screen.
Figure 186 Configuration > AAA > TACACS+
The following table describes the labels in this screen.
Authentication
Port
Enter the authentication port number(s) as a value between 0 and 65535.
Key String Enter the authentication key string: 0 - 63 ASCII Alphanumeric Characters.
Timeout for
Reply
Enter the number of time outs for replies. The value can be between 1 and 30 seconds.
Retries Enter the number of retries. The value can be between 1 and 30.
Server Priority Select the server priority as High or Low.
Usage Select the server usage type as Login, 802.1X, or All.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
Table 151 Configuration > AAA > RADIUS > Add/Modify (continued)
LABEL DESCRIPTION
Table 152 Configuration > AAA > TACACS+
LABEL DESCRIPTION
Server
Add Click Add to create a new Server entry.
Server Displays the server name(s) as an IP address or a domain name.
Port Displays the port number(s) as a value between 0 and 65535.
Key Displays the authentication key.
Timeout Displays the number of time outs for replies. The value can be between 1 and 30 seconds.
Priority Displays the priority as High or Low.
Action
Edit Click to Edit modify the entry.
Modify Click Delete to delete the entry.
To Next Page
Loading...
