ZyXEL Communications GS1900-8 - Remote Access Control; The Global Screen

Chapter 31 Configuration: Management
GS1900 Series User’s Guide
211
31.7 Remote Access Control
31.7.1 The Global Screen
Use this screen to configure the Global settings. Click Configuration > Management > Remote
Access Control to open this screen.
Figure 208 Configuration > Management > Remote Access Control
The following table describes the labels in this screen.
Password
Confirm
Enter the same password again to confirm.
Privilege Level Select the privilege level of the user range: admin and user.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
Table 173 Configuration > Management > Users > Add/Modify (continued)
LABEL DESCRIPTION
Table 174 Configuration > Management > Remote Access Control
LABEL DESCRIPTION
Global
State Select the global remote access setting to be enabled or disabled.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
Profile
Add Click Add to create a new profile entry.
No. Displays the priority level of the entry. The value can be between 1 and 16.
Action Displays the action value. The values are Permit or Deny.