ZyXEL Communications GS1900-8 - Activate the Backup Image; Backup a Configuration File; Overview

Chapter 32 Maintenance
GS1900 Series User’s Guide
216
Figure 211 Maintenance > Firmware > Management
The following table describes the labels shown under Images Information.
32.2.2 Activate the Backup Image
The current active partition is shown under Image Select.
Follow the steps below to choose the backup image if you are facing problems with the active
partition during boot.
1. In Active Image, choose Partition0 (Backup).
2. Click Apply to activate the backup image.
OR
Click Cancel to discard the changes.
32.3 Backup a Configuration File
32.3.1 Overview
You can save various “snapshots” of your device to the server or your computer and restore them
at a later date, if required.
Table 177 Maintenance > Firmware > Management
LABEL DESCRIPTION
Flash Partition Displays the partition number.
Firmware
Version
Displays the name given to the partition image, if any.
This field also displays the imagine type: Active or Backup.
Image Size Displays the size of the partition image in bytes.
Created Time Displays the date and time when the image was created in the Coordinated Universal Time
(UTC) format.