ZyXEL Communications GS1900-8 - Reboot; Overview; Reboot the Switch

Chapter 32 Maintenance
GS1900 Series User’s Guide
224
32.8 Reboot
32.8.1 Overview
You can reboot the Switch from the web configurator.
Click Maintenance > Reboot in the navigation panel to open this screen. Use this screen to
restart the Switch without physically turning the power off.
Figure 219 Maintenance > Reboot
32.8.2 Reboot the Switch
Follow the steps below to restart the Switch.
1. Click Reboot.
2. Click OK and then wait for the Switch to restart. This process takes up to two minutes and does
not affect the Switch’s configuration.
OR
Click Cancel to discard the changes.