ZyXEL Communications GS1900-8 - Page 40

Chapter 5 The Web Configurator
GS1900 Series User’s Guide
40
MST Port Configure MST port settings.
LLDP Configure global, port, local information, MED network policy, and
MED port settings.
Global Configure global settings.
Port Configure port settings.
Local Information Configure local information settings.
MED Network
Policy
Configure MED network policy settings.
MED Port Configure MED port settings.
QoS Configure general and trust mode settings.
General Port Configure port settings.
Queue This link takes you to a screen where you can configure queuing
with associated queue weights for each port.
CoS Mapping Configure CoS mapping settings.
DSCP Mapping Configure DSCP mapping settings.
IP Precedence
Mapping
Configure IP precedence mapping settings.
Trust Mode Global Configure global settings.
Port Configure port settings.
Security Configure port security, protected port, 802.1X and DoS settings.
Port Security Global Configure global settings.
Port Configure port settings.
Protected Port Configure protected port settings.
802.1X Global Configure global settings.
Port Configure port settings.
DoS Global Configure global settings.
Port Configure port settings.
AAA This link takes you to a screen where you can view authentication,
authorization and accounting services via external servers. The
external servers can be either RADIUS (Remote Authentication
Dial-In User Service) or TACACS+ (Terminal Access Controller
Access-Control System Plus).
Auth Method Configure auth method settings.
RADIUS Configure RADIUS settings.
TACACS+ Configure TACACS+ settings.
Management Configure syslog, SNMP, error disable, HTTP/HTTPS, users and
remote access control.
Syslog Global Configure global settings.
Local Configure local settings.
Remote Configure remote settings.
SNMP Global Configure global settings.
Community Configure community settings.
Group Configure group settings.
User Configure users settings.
Table 8 Configuration Menu Screens Summary (continued)
FOLDER OR LINK TAB FUNCTION