Chapter 6 Getting Start
GS1900 Series User’s Guide
48
Figure 42 Getting Start > VLAN> 3 Step 3 Finish
Each field is described in the following table.
QoS
In QoS, you can create QoS settings, and view finished results.
In order to create QoS settings, please do the following. Click Getting Start > QoS > 1 Step 1
QoS (Quality ofOf Service) to access this screen.
Table 16 Getting Start > VLAN > 3 Step 3 Finish
LABEL DESCRIPTION
Currently VLAN ID This field displays the VLAN identification number.
Tag Ports belonging to the specified VLAN tag all outgoing frames transmitted.
Untag Ports belonging to the specified VLAN don't tag all outgoing frames transmitted.
Previous Click Previous to show the previous screen.
Finish Review the information and click Finish to create the task.
To Next Page
Loading...
