ZyXEL Communications GS1900-8 - Monitor: System; Chapter 7 Monitor: System; Overview; What You Can Do in this Chapter

GS1900 Series User’s Guide
54
CHAPTER 7
Monitor: System
7.1 Overview
This section provides information for System in Monitor. Use the System screens to view general
Switch settings.
7.1.1 What You Can Do in this Chapter
•The IP screen (Section 7.2 on page 54) displays IPv4 and IPv6.
•The Information screen (Section 7.3 on page 56) displays the system information.
7.2 IP
The Switch needs an IP address for it to be managed over the network. The factory default IP
address is 192.168.1.1. The subnet mask specifies the network number portion of an IP address.
The factory default subnet mask is 255.255.255.0.
7.2.1 IPv4
Use this screen to view the Switch’s IPv4 information. Click Monitor > System > IP > IPv4 to
open this screen.
Figure 47 Monitor > System > IP > IPv4