ZyXEL Communications GS1900-8 - Ipv6

Chapter 7 Monitor: System
GS1900 Series User’s Guide
55
The following table describes the labels in this screen.
7.2.2 IPv6
Use this screen to view the Switch’s IPv6 information. Click Monitor > System > IP > IPv6 to
open this screen.
Figure 48 Monitor > System > IP > IPv6
The following table describes the labels in this screen.
Table 21 Monitor > System > IP > IPv4
LABEL DESCRIPTION
DHCP State This field displays the state of Dynamic Host Configuration Protocol RFC 2131 and RFC 2132
(DHCP).
IP Address This field displays IP address of the Switch in the IP domain.
Subnet Mask This field displays the subnet mask of the Switch in the IP domain.
Gateway This field displays the IP address of the default outgoing gateway in dotted decimal
notation, for example 192.168.1.254.
DNS Server 1 DNS (Domain Name System) is for mapping a domain name to its corresponding IP address
and vice versa. This field displays a domain name server IP address, enabling the use of a
domain.
DNS Server 2 DNS (Domain Name System) is for mapping a domain name to its corresponding IP address
and vice versa. This field displays a domain name server IP address, enabling the use of a
domain.
Management
VLAN
This field displays the management VLAN.
Table 22 Monitor > System > IP > IPv6
LABEL DESCRIPTION
Auto
Configuration
This field displays auto configuration.
IPv6 Address This field displays IP address of the Switch in the IP domain.
IPv6 Gateway This field displays the IP address of the default outgoing gateway.
DHCPv6 Client This field displays the Switch’s DHCP settings when it is acting as a DHCPv6 client.