Chapter 8 Monitor: Port
GS1900 Series User’s Guide
63
8.5 Storm Control
This section shows you the storm control feature.
Storm control limits the number of broadcast, multicast and unicast packets the Switch receives per
second on the ports. When the maximum number of allowable broadcast, multicast and/or unicast
packets is reached per second, the subsequent packets are discarded. Enabling this feature reduces
broadcast, multicast and/or unicast packets in your network. You can specify limits for each packet
type on each port.
Click Monitor > Port > Storm Control to access this screen.
Figure 56 Monitor > Port > Storm Control
Each field is described in the following table.
Ingress
RateLimit (Kbps)
View the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming
traffic flow on a port.
Egress RateLimit
(Kbps)
View the maximum bandwidth allowed in kilobits per second (Kbps) for the out-going
traffic flow on a port.
Table 28 Monitor > Port > Bandwidth Management > Bandwidth Control (continued)
LABEL DESCRIPTION
Table 29 Monitor > Port > Storm Control
LABEL DESCRIPTION
Port
Port This field displays the port number.
State This field displays the state.
Broadcast (pps) Displays how many broadcast packets the port receives (in pps).
Unknown
Multicast (pps)
Displays how many unknown multicast packets the port receives (in pps).
Unknown
Unicast (pps)
Displays how many unknown unicast packets the port receives (in pps).
Action Displays the action the device takes when a limit is reached. The following options are
available:
• Drop - drop the packet.
• Shutdown - shutdown the connection.
To Next Page
Loading...
