Chapter 10 Monitor: MAC Table
GS1900 Series User’s Guide
71
10.1.1 What You Can Do in this Chapter
•The MAC Table screen (Section 10.2 on page 71) displays view filter and MAC table of the
Switch.
10.2 MAC Table
Use this screen to view filter static and MAC table settings. Click Monitor > MAC Table to access
this screen.
Figure 64 Monitor > MAC Table
Each field is described in the following table.
Table 35 Monitor > MAC Table
LABEL DESCRIPTION
View filter
MAC Address This is the MAC address of the device from which this incoming frame came.
VLAN Displays a type for the VLAN for identification purposes.
Port This is the port from which the above MAC address was learned.
View This link takes you to a screen where you can view the MAC address and VLAN ID of a
device attach to a port. You can also view what kind of MAC address it is.
Clear Click Clear to return the fields to the factory defaults.
MAC Table
MAC Address This is the MAC address of the device from which this incoming frame came.
VLAN Displays a type for the VLAN for identification purposes.
Type This shows whether the MAC address is dynamic (learned by the Switch) or static
(manually entered in the Static MAC Forwarding screen).
Port This is the port from which the above MAC address was learned.
Total Entries Displays the number of total entries.
To Next Page
Loading...
