Chapter 13 Monitor: Multicast
GS1900 Series User’s Guide
78
Each field is described in the following table.
13.2.2 Statistics
Use this screen to view the Switch’s IGMP statistics. Click Monitor > Multicast > IGMP >
Statistics to access this screen.
Figure 71 Monitor > Multicast > IGMP > Statistics
Table 38 Monitor > Multicast > IGMP > Vlan
LABEL DESCRIPTION
VLAN ID Displays the identification for the VLAN.
Operate Status Displays the status of the operation.
Router Ports Auto
Learn
Displays whether the router ports are auto learn or not.
Query
Retry Displays the number of retry.
Interval Displays the number (in seconds) for the time interval.
Max. Reponse
Interval(sec)
Displays the maximum reponse (in seconds) for the time interval.
Last Member Query
Count Displays the number of count.
Interval(sec) Displays the in seconds for the time interval.
Querier Allow sthe Switch to send IGMP General Query messages to the VLANs with the
multicast hosts attached.
Status This field displays the entry as querier or non-querier.
Version This field displays the entry querier version.
IP This field displays the the entry querier IP address.
Total Entries This field displays the number of total entries.
To Next Page
Loading...
