ZyXEL Communications GS1900-8 - Chapter 18 Configuration: System; Overview; What You Can Do in this Chapter; The Ipv4 Screen

GS1900 Series User’s Guide
96
CHAPTER 18
Configuration: System
18.1 Overview
This section provides information for System in Configuration.
18.1.1 What You Can Do in this Chapter
• The IP screen (Section 18.2 on page 96) displays IPv4 and IPv6 settings.
• The Time screen (Section 18.3 on page 98) displays the system time and SNTP settings.
• The Information screen (Section 18.4 on page 99) displays the system information.
18.2 IP
The Switch needs an IP address for it to be managed over the network. The factory default IP
address is 192.168.1.1. The subnet mask specifies the network number portion of an IP address.
The factory default subnet mask is 255.255.255.0.
18.2.1 The IPv4 Screen
Use this screen to view the IPv4 interface status and Switch’s management IPv4 addresses. Click
Configuration > System > IP > IPv4 to open this screen.
Figure 88 Configuration > System > IP > IPv4