Chapter 19 Configuration: Port
GS1900 Series User’s Guide
117
Fig ure 115 Configuration > Port > Port > Edit
The following table describes the labels in this screen.
19.3 EEE
Use this screen to view and edit the port EEE settings.
19.3.1 The EEE Sc re e n
Use this screen to view Switch port Energy-Efficient Ethernet (EEE) settings and select ports for
configuration. Click C o nfig ura tio n > Po rt > EEE > EEE to open this screen.
Table 63 Configuration > Port > Port > Edit
LABEL DESCRIPTIO N
Port
Port List Displays the list of port index numbers that are being configured.
Port Name Enter a descriptive name that identifies this port. The length of the name can be up to 32 alpha-
numerical characters.
Note: Due to space limitations, the port name may be truncated in some Web Configurator
screens.
State Select Ena b le to enable the ports or Disa ble to disable them.
Speed Select the speed of the Ethernet connection on this port. The choices are Auto, 10M, 100M, and
1000M.
Duplex Select the duplex mode of the Ethernet connection on this port. The choices are Auto, Full, or
Ha lf.
FlowCtrl State Select Ena b le to allow the device to manage data flow or Disa b le to have no data flow
management. A concentration of traffic on a port decreases port bandwidth and overflows
buffer memory causing packet discards and frame losses. Flow Control is used to regulate
transmission of signals to match the bandwidth of the receiving port.
Apply Click A pp ly to save the changes.
Cancel Click C a nc e l to discard the changes.
To Next Page
Loading...
