Chapter 30 Configuration: Security
GS1900 Series User’s Guide
204
Fig ure 203 Configuration > Security > 802.1X > Port
The following table describes the labels in this screen.
30.4.3 The Po rt Edit Sc re e n
Use this screen to configure the Port settings. Click C o nfig ura tio n > Se c urity > 802.1X > Po rt > Edit to open
this screen.
Table 150 Configuration > Security > 802.1X > Port
LABEL DESCRIPTIO N
Port
Port Displays the port index value.
State Displays the Trust status as enabled or disabled.
Reauthentication Displays if Reauthentication function is enabled. If enabled, the subscriber has to periodically
re-enter his or her username and password to stay connected to the port.
Reauthentication
Period
Displays the Reauthentication period for the function: the period of time when a client has to
re-enter his or her username and password to stay connected to the port.
Quiet Period Display the time out period to transmit request after receiving a rejection from the sever.
Supplicant Time
out
Display the time out period to transmit a request when the client does not respond.
Maximum Request
Retries
Enter the maximum number of request retries.
Edit Select this check box to configure the properties of a port. Click the Edit button change the
properties of the port.
Cancel Click C a nc e l to discard the changes.
To Next Page
Loading...
