ZyXEL Communications GS1900-8HP - The RADIUS Add or Edit Screen

Chapter 31 Configuration: AAA
GS1900 Series User’s Guide
211
31.3.2 The RADIUS Add o r Edit Sc re e n
Use this screen to configure the RADIUS settings. Click Config ura tio n > AAA > RADIUS > Add or Edit to
open this screen.
Fig ure 211 Configuration > AAA > RADIUS > Add or Edit
The following table describes the labels in this screen.
Priority Displays the server priority as Hig h or Lo w.
Usage Type Displays the server usage type as Lo g in, 802.1X, or A ll.
Action
Edit Click to Edit modify the entry.
Delete Click De le te to delete the entry.
Add Click Add to create a new Se rve r entry.
Table 158 Configuration > AAA > RADIUS (continued)
LABEL DESCRIPTIO N
Table 159 Configuration > AAA > RADIUS > Add or Edit
LABEL DESCRIPTIO N
RADIUS
Server Enter the server names as an IP address or a domain name.
Authentication
Port
Enter the authentication port numbers as a value between 0 and 65535.
Key String Enter the authentication key string: 0 – 63 ASCII Alphanumeric Characters.
Timeout for Reply Enter the number of time outs for replies. The value can be between 1 and 30 seconds.
Retries Enter the number of retries. The value can be between 1 and 30.
Server Priority Select the server priority as Hig h or Lo w.
Usage Select the server usage type as Lo g in, 802.1X, or All.
Apply Click A pp ly to save the changes.
Cancel Click C a nc e l to discard the changes.