Chapter 5 Web Configurator
GS1900 Series User’s Guide
47
5.3 Na vig a ting the We b C o nfig ura to r
The following summarizes how to navigate the Web Configurator from the G e tting Sta rt screen. This
guide uses the GS1900-24HP screens as an example. The screens may vary slightly for different models.
Fig ure 52 The Web Configurator’s Main Screen
The Web Configurator’s main screen is divided into these parts:
• A – Title Bar
• B – Navigation Panel
• C – Main Window
5.3.1 Title Ba r
The title bar provides some useful links that always appear over the screens below, regardless of how
deep into the Web Configurator you navigate.
Fig ure 53 Title Bar
The icons provide the following functions.
Apply Click App ly to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Sa ve link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Ca nc e l to begin configuring this screen afresh.
Table 7 Web Configurator: Password > Users/SNMP (continued)
LABEL DESCRIPTION
Table 8 Title Bar: Web Configurator Icons
LABEL DESCRIPTIO N
Refresh Click Re fre sh to reload the page.
Save Click this to apply your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Sa ve link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Status Click this to display basic information about the Switch.
To Next Page
Loading...
