GS1900 Series User’s Guide
54
C HAPTER 6
G e tting Sta rt
6.1 O ve rvie w
Use the G e tting Sta rt screens to check status information about the Switch.
6.1.1 Wha t You C a n Do in this C ha pte r
The main G e tting Sta rt screen (Section 6.2 on page 54) displays the Switch’s general device information,
system status, system resource usage, and interface status. You can also display other status screens for
more information.
6.2 G e tting Sta rt
This screen is the first thing you see when you log into the Switch. It also appears every time you click the
G e tting Sta rt icon in the navigation panel. The G e tting Sta rt displays general device information, system
status, system resource usage, and interface status in widgets.
Fig ure 55 Getting Start
The following table describes the labels in this screen.
Table 12 Getting Start
LABEL DESCRIPTIO N
Refresh Interval (A) Use the drop-box to select: None, 5 seconds, 10 seconds, 15 seconds, 20 seconds, 25
seconds, or 30 seconds.
Virtual Device Displays an image of the Switch.
Wizard Displays the following links: Start up, VLAN, QoS, and Link aggregation.
To Next Page
Loading...
