Chapter 8 Monitor: Port
GS1900 Series User’s Guide
68
Each field is described in the following table.
8.2.2 Po rt C o unte rs
Use this screen to view the Switch’s port counters settings. Click Mo nito r > Po rt > Port > Port C o unte rs to
access this screen.
Fig ure 70 Monitor > Port > Port > Port Counters (Port 1 Interface mib Counters)
Table 26 Monitor > Port > Port > Status
LABEL DESCRIPTIO N
Port This is the port index number.
Port Name A descriptive name that identifies this port.
State This is port admin setting state.
Link Status This field displays Up, Do wn or No t Pre se nt. It displays Up when the port is linked up or Do wn
when it is not. When no any physical port is binding with this group, it displays No t Pre se nt.
Speed View the speed of the Ethernet connection on this port.
Duplex View the duplex mode of the Ethernet connection on this port.
FlowCtrl Status A concentration of traffic on a port decreases port bandwidth and overflows buffer
memory causing packet discards and frame losses. Flow Control is used to regulate
transmission of signals to match the bandwidth of the receiving port.
Type View the type on this port.
To Next Page
Loading...
