To Next PageTo Next Page
Need help?Do you have a question about the ZyXEL Communications GS1920-24HPv2 and is the answer not in the manual?
General| Brand | ZyXEL Communications |
|---|---|
| Model | GS1920-24HPv2 |
| Category | Switch |
| Language | English |
Explains NebulaFlex, allowing operation in standalone or cloud mode for switch management.
Explains the Power Sourcing Equipment (PSE) feature, supporting IEEE 802.3af and 802.3at standards.
Details various methods to manage the Switch, including NCC, Web Configurator, FTP, SNMP, Cluster Management, and ZON Utility.
Provides recommendations for secure and effective Switch management, including password practices and backups.
Outlines essential safety measures to observe before using the Switch, including handling and environment.
Details the procedure for installing the Switch in a freestanding manner, ensuring it is clean and dry.
Provides instructions for mounting the GS1920-8HPv2 Switch under a table, including requirements and precautions.
Explains how to mount the GS1920-8HPv2 Switch on a wall, including installation requirements and warnings.
Guides on mounting the Switch on a standard EIA rack using a rack-mounting kit, including requirements and precautions.
Provides safety measures for grounding the Switch to prevent damage and electrocution.
Details how to connect the AC power to the Switch, ensuring proper source and airflow.
Guides on how to access the Switch's Web Configurator via browser, including default IP and login.
Describes the Zyxel One Network (ZON) Utility for network device deployment and management.
Recommends changing the default administrator password upon first login for security.
Explains how to save configuration changes to run-time memory and non-volatile memory.
Provides methods to reset the Switch to factory defaults or reboot it.
Explains VLANs and how to configure port 1 as a member of VLAN 2 in an example setup.
Details how to set the port VID on port 1 to add a tag to incoming untagged frames for VLAN 2.
Guides on setting up a static IP address for management purposes, especially if DHCP fails.
Provides a tutorial on configuring DHCPv4 snooping, including VLAN creation and port setup.
Details how to configure the Switch to forward DHCP client requests to a specific DHCP server.
Provides visualized port status for monitoring, showing individual port details and status.
Provides detailed port statistics and performance data for individual ports.
Explains how to enable Nebula Control Center (NCC) Discovery for cloud management.
Covers configuring general settings such as system name and time, including time server and daylight saving.
Details on adding or editing interfaces, specifically the VLAN interface type for IPv6.
Guides on configuring default gateway, DNS server, and adding IP domains.
Details how to enable communication between the Switch and NCC through a proxy server.
Covers configuring global IPv6 settings like hop limit and rate limit.
Explains how to view and configure IPv6 interfaces, including activation and autoconfiguration.
Details how to view and configure the interface's IPv6 global address.
Covers configuring neighbor discovery settings for each interface.
Explains how to configure the Switch's DHCP settings when acting as a DHCPv6 client.
Describes setting up login accounts, including administrator and non-administrator roles.
Guides on configuring general SNMP settings, including version and community strings.
Explains how to create SNMP users for authentication using SNMP v3.
Guides on enabling or disabling sending SNMP traps on a per-port basis.
Guides on basic Switch setup, where VLAN setup screens vary based on VLAN type selection.
Guides on configuring system logging settings and external syslog servers.
Guides on configuring Green Ethernet settings on copper ports to reduce power consumption.
Details how to configure static link aggregation settings for trunk groups.
Explains how to enable Link Aggregation Control Protocol (LACP) for dynamic link aggregation.
Guides on configuring global LLDP settings on the Switch.
Covers configuring LLDP-MED parameters for media endpoint devices.
Guides on configuring LLDP-MED network policy parameters for applications.
Guides on setting PoE power management mode, priority, power-up mode, and max power for PDs.
Covers configuring Switch port settings like speed, duplex, flow control, and 802.1p priority.
Guides on configuring layer 2 protocol tunneling on the Switch for various protocols like STP, CDP, VTP.
Guides on enabling IGMP snooping to forward group multicast traffic efficiently.
Explains viewing and creating multicast VLANs and selecting receiver/source ports.
Details configuring MSTP settings, including bridge priority and instances.
Details creating or editing static MAC filtering rules for traffic control.
Details creating or editing static MAC forwarding rules for ports.
Details configuring static VLANs for the Switch, including port settings.
Details configuring subnet-based VLANs with priority and VID.
Explains Voice VLAN for preserving voice traffic quality and separating it from data traffic.
Sets up VLANs based on source MAC address using Vendor ID mapping.
Guides on configuring DHCP relay for clients and servers not in the same broadcast domain.
Explains configuring global DHCPv4 relay and applying option 82 profiles to ports.
Describes configuring authentication, authorization, and accounting settings using AAA servers.
Guides on configuring RADIUS server settings for authentication and accounting.
Covers configuring authentication, authorization, and accounting methods on the Switch.
Specifies a group of trusted computers for administrators to manage the Switch.
Guides on encrypting all passwords and configuring display settings for plain text passwords.
Details defining classifiers and specifying actions to apply to matching traffic.
Explains configuring the Switch to automatically undo actions after errors are resolved.
Details managing static bindings for DHCP snooping and ARP inspection.
Guides on enabling DHCP snooping, specifying DHCP server location, and configuring the database.
Explains specifying trusted/untrusted ports and ARP packet rates.
Guides on activating IEEE 802.1x security for port authentication.
Details enabling and assigning a guest VLAN to a port for unauthenticated users.
Guides on restoring a previously saved configuration file from a computer to the Switch.
Details resetting the Switch to its Zyxel default configuration settings.
Details upgrading the Switch's firmware through Web Configurator or NCC.
Explains restarting the Switch without power cycling and loading configuration files.
Troubleshooting guide for power issues, LED behavior, and hardware connections.
Addresses issues with accessing the Login screen and forgetting user name/password.
Troubleshooting lost configuration settings after restart and file loading issues.
Provides solutions for issues where Powered Devices (PDs) are not receiving power.
