Chapter 9 VLAN
GS2200-24/24P User’s Guide
101
9.4 Configure VLAN Port Settings
Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q)
settings on a port. Click the VLAN Port Setting link in the VLAN Status screen.
Figure 52 Advanced Application > VLAN > VLAN Port Setting
The following table describes the labels in this screen.
Table 20 Advanced Application > VLAN > VLAN Port Setting
LABEL DESCRIPTION
GVRP GVRP (GARP VLAN Registration Protocol) is a registration protocol that
defines a way for switches to register necessary VLAN members on
ports across the network.
Select this check box to permit VLAN groups beyond the local Switch.
Ingress Check If this check box is selected, the Switch discards incoming frames on a
port for VLANs that do not include this port in its member set.
Clear this check box to disable ingress filtering.
Port This field displays the port number.
To Next Page
Loading...
