ZyXEL Communications GS2200-24 Series - Page 296

Chapter 32 Access Control
GS2200-24/24P User’s Guide
296
transceiver-
ddmi
transceiverddmiEventOn 1.3.6.1.4.1.890.1.5.8.55.27
.2.1
This trap is sent when one of
the device operating
parameters (such as
transceiver temperature,
laser bias current,
transmitted optical power,
received optical power and
transceiver supply voltage) is
above or below a factory set
normal range.
transceiverddmiEventCle
ar
1.3.6.1.4.1.890.1.5.8.55.27
.2.2
This trap is sent when all
device operating parameters
return to the normal
operating range.
Table 97 SNMP InterfaceTraps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
Table 98 AAA Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
authenticatio
n
authenticationFailure 1.3.6.1.6.3.1.1.5.5 This trap is sent when
authentication fails due to
incorrect user name and/or
password.
AuthenticationFailureEven
tOn
1.3.6.1.4.1.890.1.5.8.55.2
7.2.1
This trap is sent when
authentication fails due to
incorrect user name and/or
password.
RADIUSNotReachableEve
ntOn
1.3.6.1.4.1.890.1.5.8.55.2
7.2.1
This trap is sent when there is
no response message from the
RADIUS server.
RADIUSNotReachableEve
ntClear
1.3.6.1.4.1.890.1.5.8.55.2
7.2.2
This trap is sent when the
RADIUS server can be
reached.
accounting RADIUSAccNotNotReacha
bleEventOn
1.3.6.1.4.1.890.1.5.8.55.2
7.2.1
This trap is sent when there is
no response message from the
RADIUS accounting server.
RADIUSAccNotNotReacha
bleEventClear
1.3.6.1.4.1.890.1.5.8.55.2
7.2.2
This trap is sent when the
RADIUS accounting server can
be reached.