ZyXEL Communications GS2200-24 - Port Setup

Chapter 8 Basic Setting
GS2200-24 User’s Guide
81
8.8 Port Setup
Use this screen to configure Switch port settings. Click Basic Setting > Port
Setup in the navigation panel to display the configuration screen.
Figure 39 Basic Setting > Port Setup
Default Gateway This field displays the IP address of the default gateway.
Delete Check the management IP addresses that you want to remove in the
Delete column, then click the Delete button.
Cancel Click Cancel to clear the selected check boxes in the Delete column.
Table 11 Basic Setting > IP Setup (continued)
LABEL DESCRIPTION