Chapter 8 Basic Setting
GS2200-24 User’s Guide
83
802.1p
Priority
This priority value is added to incoming frames without a (802.1p) priority
queue tag. See Priority Queue Assignment in Table 10 on page 77 for
more information.
Apply Click Apply to save your changes to the Switch’s run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 12 Basic Setting > Port Setup (continued)
LABEL DESCRIPTION
To Next Page
Loading...
